TC1113B

2 CAN FD to USB/WIFI

When used in conjunction with the powerful TSMaster software, these tools support loading DBC and ARXML database files. This allows for convenient monitoring, analysis, and simulation of CAN FD bus data. Additionally, they support UDS diagnostics, ECU flashing, and othe functionalities

WIFI mode is recommended for message monitoring and diagnostics, but not recommended for simulation. The secondary development API, available for both Windows and Linux, supports various programming environments, including C++, C#, LabView, Python, and more. This facilitates seamless integration into diverse testing systems, offering efficiency and user-friendliness.

WIFI functionality

  • Supports IEEE 802.11 b/g/n protocol
  • Operating channel center frequency range: 2412 ~ 2484 MHz
  • Supports 20MHz and 40MHz bandwidth in the 2.4GHz band
  • Supports 1 T 1 R mode, with data rates up to 150 Mbps
  • Wireless Multimedia (WMM)
  • Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU)
  • Immediate block acknowledgment (Immediate Block ACK)
  • Fragmentation and defragmentation Transmission opportunity (TXOP)
  • Beacon auto-detection (Hardware TSF)
  • 4× virtual Wi-Fi interfaces
  • Simultaneously supports Infrastructure BSS (Basic Service Set),Station mode, SoftAP mode, Station + SoftAP mode,and Promiscuous mode
    • µs (microsecond) level hardware message timestamp, meeting advanced requirements
    • High-speed USB 2.0 interface, plug-and-play design for Windows and Linux systems, ensuring system compatibility
    • CAN channel DC 2500V isolation
    • Automotive-grade design, supports DBC and ARXML database files through TSMaster software
    • Adjustable CAN channel baud rate from 125Kbps to 1Mbps
    • Adjustable CAN FD channel baud rate from 125Kbps to 8Mbps
    • Supports BLF, ASC format data recording, and offline/online playback
    • Supports UDS-based Flash Bootloader
    • Supports secondary development interfaces for Windows and Linux systems
    • Built-in 120-ohm terminal resistance configurable via software
    Specification Description Specification Description
    Channel 2 x CAN FD PC End High-speed USB 2.0
    CAN End OBD Driver Plug-and-play design for Windows and Linux systems,
    ensuring system compatibility
    CAN Supports CAN 2.0A, B protocols,
    compliant with ISO11898-1 standard,
    baud rate 125Kbps–1Mbps    		 CAN FD Supports ISO and non-ISO CAN FD,
    baud rates from 125Kbps to 8Mbps
    Timestamp 1μs, hardware message timestamp
    for advanced requirements    		 Terminal Resistance Built-in 120-ohm terminal resistance,
    configurable via software
    Isolation DC 2500V isolation for CAN channels Casing Material Plastic
    Dimensions 80mm x 40mm x 20mm Operating Temperature -40°C to 70°C
    Operating Humidity 10% to 90% (non-condensing) Operating Environment Keep away from corrosive gases
    Messages Sent per Second* Maximum 20,000 messages per second Messages Received per Second* Maximum 20,000 messages per second
    * Single channel at 1 Mbps with a 0-byte data field
    Power Supply USB powered Buffer Each channel supports a transmit buffer
    of up to 1000 CAN frames
    • OBD Data Viewing and Analysis
    • Wireless Transmission of OBD Data
    • DTC Fault Viewing and Clearing
    • Vehicle/ECU Flashing

    Custom firmware support, diagnostics, and remote configuration available upon request.

    📄 Download Datasheet
    📄 Download User Manual